Turbine Engine Assembly System Accessories

Custom Frame Heights Available (Low Profile Shown)

 

 

Custom_Air_Bearing_Rotary-Clear_Aperture_Low_Profile_Table-1
custom-vacuum-fixture-5

Small & Large Custom Jigs

The small custom jig is ideal for rotary tables up to 200mm in diameter, while the large custom jig is typically best for medium rotary tables up to 400mm in diameter. These fixture plates are accurately located and fastened directly on the rotary table. This simple, economical method allows using modular fixturing or dedicated permanent fixturing. We have custom vacuum jigs available as well.

Scroll Chuck with 3-Point Contact

These 3-point contact scroll chucks are constructed with high-quality forged steel, allowing for higher lathe speeds. The hardened ground scroll is precision balanced, which allows for greater accuracy and longer life. Similarly, the hardened jaws and pinions increase the life of the entire chuck. The American standard tongue and groove master jaws allow for greater flexibility, making this a top choice tool.

BT150-3-Jaw-Scroll-Chuck-2
EAS-Master-Certification-Artifact-3-620x752

Master Certification Artifact

ABTech’s large precision-ground diameter and face surfaces to easily locate gage heads and confirm system accuracy.

Inspection Style Gage Stands (Model GSI-24P/12A Shown)

Specifications:
• 24” vertical square post with rack-and-pinion drive
• Available with 12”, 14”, 18” horizontal arm with friction drive
• 1/4” Ø swivel mount for LVDT electronic or dial indicators
• Drive assembly with 360° swivel and locks to hold post and arm positions

Base options:
• Portable heavy-duty cast-iron base with 3-point hardened steel pads
• Locking swivel mount for the side of granite surface plate*
• T-slot base plate with locking swivel mount*
*Requires threaded inserts in granite or T-slot plate (not included)

Custom sizes are available on request.

Inspection-Style-Gage-Stand-3
universal-Probe-Stand-with-fine-adj-base-4-489x1024

Universal Probe Stand with Fine Adjust Base

Specifications:
• 24” travel vertical post with friction drive and lock
• 12” travel horizontal arm with friction drive, swivel, and lock
• Drive assembly with 360° swivel
• 1/4” Ø swivel mount for LVDT electronic or dial indicators

Base options:
• Portable base with 3-point hardened steel pads
• Portable base with built-in fine adjust feature
• Locking swivel mount for the side of granite surface plate*
*Requires threaded inserts in granite (not included)

Custom sizes are available on request.

 

Tool Room Style Portable Gage Stands (Model GST-24P/12A Shown)

Specifications:
• 1.0” diameter x 24” tall vertical post
• 5/8” diameter x 12” horizontal arm
• 360° manual swivel assembly with locks to hold post and arm positions
• 1/4” Ø swivel mount for LVDT’s, electronic or dial indicators

Base options:
• Portable base with 3-point hardened steel pads
• Portable base with built-in fine adjust feature
• Locking swivel mount for the side of granite surface plate*
*Requires threaded inserts in granite (not included)

Custom sizes are available on request.

GST-Toolroom-Style-Gage-Stand-1-579x1024
Probe-mount_Lever-mount

Ultra-Fine & Fine Adjust Probe Mounts

The ultra-fine and fine adjust probe mounts can be used with most gage arms and with both lever and plunger probe mounts. The fine adjust mount has a .020” pitch adjustment screw and the ultra-fine adjust mount has a .013” pitch adjustment screw.

Adjustable Probe Mounts (Plunger and lever Shown)

On the left, see the clamps for the barrel of a plunger probe. And on the right, see the dovetail found on the lever probes.

 

plunger-probe-with-mount_W-INSET
Dual-Plunger-Type-Gage-Mounts-COMBO-620x690

Dual Plunger-Type Gage Mounts (#08338A Shown)

Our custom probe mounts are designed to allow two probes to gain access to multiple surfaces in close proximity to each other using one horizontal arm.

Combo: Lever/Plunger-Type Gage Mount & Dual Plunger-Type Gage Mount

The combo lever/plunger type probe mount is designed to allow two probes to gain access to a face and diameter in close proximity to one another using one horizontal arm. The dual plunger-type gage mount is made to allow two probes to gain access to two OD's using one horizontal arm.

Combo-Lever-Plunger-Type-Gage-Mount_COMBO--1024x721
cables-4

Extension Cables

These extension cables are made to be used with both the lever and plunger-style probes. There are various standard lengths available, and custom lengths are available on request.

MicroTIR Gages

The MicroTIR user interface displays measurement results in a traditional analog-style needle and digital format. The maximum and minimum readings and TIR are all captured which removes potential operator error and user subjectivity. You can input part numbers and descriptions and your results can be saved or printed for customer verification or as a traveler for the part.

microtir-gages
plunger-probe-with-mount_W-INSET

Plunger Probe (Clamp Sold Separate)

ABTech offers an industry-standard plunger-type electronic indicator, as shown.

Lever-Type Probe (Shown without Mounting Clamp)

We provide industry-standard lever-type electronic indicators.

45-degree-probe-3-1024x721
90degree_cable_exit-1024x840

90-Degree Cable Exit

The adapters we offer at ABTech take a standard cable exit on a plunger probe and provide a 90° bend in the cable. This allows for easier probe placement on parts in certain configurations.

Changeable Probe Tip Adaptor

This adapter allows you to use 4-48 threaded probe tips which allow for an easy change of custom lengths, ball sizes, ball material etc. These adapters also eliminate left and right probe tip movement. This reduces the chance of improper probe placement on part surfaces.

changeable_Probetip-adaptor-1
changeable_Probetips-3

Custom Probe Tips

ABTech has custom probe tips available for both lever and plunger-style probes – length, material, ball/tip size, shape

Gage Blocks for Probe Calibration

ABTech’s gage blocks are a system for producing precision lengths. These are used to calibrate our standard lever and plunger probes on our standard products that use electronic probes. The individual gage block is metal and is precision ground to a specific thickness. An important feature of gage blocks is that they can be joined together with very little dimensional uncertainty. A small number of gauge blocks can be used to create accurate lengths within a wide range.

 

Gauge-blocks-4
small-air-filter-regulator-1

Large Air Filter Regulator

To ensure lasting performance and contaminate protection for your air-bearing motion system ABTech offers two basic dual element filter/regulator accessory units. The small model unit (#00787AC) has a 5.0-micron pre-filter and 0.5-micron coalescing secondary filter and the larger model unit (#00938AD) has a 5.0-micron pre-filter and a 0.3-micron coalescing secondary filter.
If your air bearing motion system is powered then we recommend adding a safety interlock pressure sensor switch to detect the loss of air supply to the air bearing stage.

 

Electronics Carts

These electronics carts are used to mount monitors, PCs, and controllers, and provides shelf space for a keyboard, mouse, and an optional printer.

FRONT_bACK-MONITOR-3-1
FILTERS-4-1024x723

Replacement Air Filters

We have various replacement air filters on offer for both small and large air filters and regulators.

Anti-Rotational Lock

These anti-rotational locks are made for all EAS tables. They are classified as "best practice" for torquing parts, over shutting off the air supply.

IMG_6307-2-1
Replacement-Components-2

Replacement Components

Contact ABTech for any replacement or spare parts.

Need more information about Accessories?

Contact Us

Solutions

made in the USA

About

Join our mailing list and never miss an update.



126 Route 12 North
Fitzwilliam, New Hampshire 03447
(603) 585-7106
Contact Us

Proud Members of:
© 2024 Copyright ABTech Inc. All rights reserved. Privacy Policy Terms & Conditions